two seats

Which Seat is the Best Choice?

Bacchetta makes four different seats to fit any kind of riding style. Since choosing to ride a recumbent is frequently a result of pain while riding traditional bikes, choosing the right seat is tantamount to a pain-free, enjoyable riding experience.

The Recurve Seat is the original Bacchetta seat. Its mesh back provides exceptional ventilation on those hot days, and the 3" high density foam cushion is comfortable and won't break down after a long day in the saddle. The seat base is shaped ideally for giving full coverage to any size rider, while cut outs in the front make it easier to reach the ground. This seat is ideal for the more upright riding position that you would find on the A20 and Bella. It weighs 4.5 pounds.

 recurve seat

I remember seeing the first Bacchetta Euromesh seat at Interbike around 2005 and thinking it was the best thing that I saw at the show! The goal was to make a lightweight seat with a similar shape to carbon fiber seats, but with better ventilation and comfort. This seat does both well. The stretched mesh across an aluminum frame provides just the right amount of give on rougher roads. The front end is cut out to make reaching the ground even easier. With the foam pad and cover, you get an even cushier ride but no ventilation; the Ventisit pad allows the air to flow right through the back of the seat onto your back. This seat is designed to be reclined like a carbon fiber seat and is best used on bikes like the CA3.0 and A70 with a higher bottom bracket. With the foam and cover, it weighs 3.5 pounds. In terms of sizing, it is comparable to a medium carbon fiber seat.

Euromesh seat


The B3 seat bridges the Recurve and Euromesh seats. It has the same mesh back as the Recurve seat but has a smaller seat base with a lower density foam. It can be run as upright as the Recurve, but the smaller seat base may make you feel like you are sliding off the front of the seat. Also, the lower density pad may break down on longer rides if run in an upright position. Ideally, this seat is best in a medium recline - weight is transferred from the seat pan to the seat back and the larger cut outs on the front of the seat allow the rider to still reach the ground. With weight similar to the Euromesh, this seat is perfect for those preferring a moderately reclined position with excellent ventilation. With the standard cushion, it weighs 3.4 pounds.

B3 seat

The Bacchetta Carbon Fiber seat is designed for performance! Our seat with the lowest weight is designed to be reclined for the best aerodynamics. If run in a moderately upright to upright position, you are bound to feel like you are sliding off of the front of the seat with every pedal stroke.

cf seat

While the carbon fiber seat does not provide any ventilation, this can be mitigated with the Ventisit seat pad. If you prefer a cushier ride (the Ventisit is definitely NOT cushy), the foam pad and cover will work well. Most will also want some sort of neckrest given the lower seat angles used with the carbon fiber seat. With foam pad and cover, it weighs 2.25 pounds.

Carbon fiber seats come in a variety of sizes: medium, large and extra large. To figure out which seat is ideal for you, take your seated shoulder height measurement by sitting on the floor up against a wall, making a mark on the wall at your collar bone and then measuring from the floor to that mark.

24-25.5" = Medium Seat

25.5-27" = Large Seat

27" or more = Extra Large Seat

If you are on the cusp of two measurements, go up if you are planning on using the foam pad with cover, go down if you are using the Ventisit pad.

While seat selection may seem like a daunting task, start by deciding on the type or riding you will be doing and go from there. We are always a phone call/text/email away if you have any questions!



Dana Lieberman|

Dana has been riding recumbents for 25 years. Whether bicycle touring, racing, commuting or just riding with the family, he has ridden almost everything out there and has no problem telling you what he thinks! Owner of Bent Up Cycles and Bacchetta Bikes, Dana is passionate about turning new riders on to the joy of recumbent cycling. He also enjoys reading SciFi, hiking in the SoCal mountains and sipping a Chai Latte at the local coffee shop!
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.